Below you will find an overview of upcoming trade fairs around the world, at which you can visit Dinnissen. Do you have questions about one of the trade fairs? If so please feel free to contact us.
Of course, you are welcome to make an individual appointment with one of our product specialists, active in the food, pet food, dairy, animal feed or chemical industry. You can find a list of Dinnissen offices on the 'Contact page'. Thank you for your interest.
Increased capacity despite using 17 fewer mixers
The amazing part is that we managed to increase the capacity, despite using 17 fewer mixers.
Edward Depre- Project Manager - Group Depre
The importance of hygiene and safety requirements
Dinnissen fully understood the importance of hygiene and safety requirements in our industry. They went the extra mile by providing us with all the necessary documentation, all ATEX drawings, and full traceability.
Anton Vleeshouwers- Project Director - DSM
Service on weekends
One day there was an important issue and one of Dinnissen's engineers immediately took action during the weekend. I have never seen other foreign partners do this.
Mr. Kimio Aono- Founder - APTe Japan
Supplied entire installation
Dinnissen is the first company we've worked with that delivers a total package. Because Dinnissen supplied the entire installation, including platforms and safety installations, the entire line is CE-certified.
Michel Kliphuis- Manager - Steinweg Amsterdam
Collaboration based on mutual respect
Our collaboration with Dinnissen is based on mutual respect and trust. We challenge each other to continuously innovate and improve
Stefan Kuijpers- Director - Vitelia
Unique in preliminary work
What really makes Dinnissen unique, is the preliminary work. You can literally count every bolt and nut in the drawing.
Kenneth Gijzen- Maintenance & Engineering Manager - AAK Rotterdam
Quadrupled production capacity
In collaboration with Dinnissen, we have quadrupled our production capacity from 3 to 12 tons per hour.
Harald Schmalwieser- Managing Director - Solan
Drastically improved feed-quality
90% of our customers with laying hens have already switched to the new feed produced using the Pegasus® mixer and the Thermidor® system.
Kurt Egli- Former manager - Egli Mühlen
Technicians, not salespeople
Dinnissen's representatives strive for the best solutions. They are engineers first and salespeople second.
Frans van Zutven- Founder and Director - Van Zutven
Mixing time of 60 seconds per batch
Previously, we had standard times in the mixing process of 14 - 15 minutes. With the Pegasus® mixer we achieve a mixing time of 60 seconds per batch.
Lothar Pixa- Director - Planta
Fully automated sampling
We considered several machine developers, but the high quality of the Dinnissen machines and the competence and commitment of the employees were decisive for us.
Arjan van Dijk- Project Manager - Ausnutria
Process specialists unafraid to push boundaries
Dinnissen possesses expertise distinct from our in-house capabilities. They are process specialists unafraid to push boundaries and set limits.
Raymond Nolet- Founder - MiFood
Choice based on trust, feeling, and price
We made a choice based on trust, feeling, and price. In this total package, Dinnissen came out best.
Marcel van den Oetelaar- Proces Technologist - Vobra
Tailor-made solution for every problem
What charmed us most about Dinnissen was that they responded perfectly to our questions each time: they jumped right in and quickly came up with a tailor-made solution to each problem.
Jos Falvay- Project manager - Perstorp
No challenge is too big
At Dinnissen, they think in terms of challenges, not problems. They don't give up and keep going until there is a solution that satisfies all parties.
Martin Sonneveld- Production Director - United Petfood Waalwijk
Customized mixers
Dinnissen thought along with us from start to finish. For example, they used existing drawings for these new mixers to save us costs in the engineering phase.
Pieter Gorter- Project Manager - ForFarmers
Didn't consider any other option than Dinnissen
When the mixers needed replacement and Dinnissen could do a one-on-one replacement, we really didn't consider any other option than Dinnissen.
Elmar Flach- Technical Specialist - Voergroep Zuid
Flexibility, cleaning, short mixing time, and a homogeneous end product
We also considered other options but on the points we considered most important - flexibility, cleaning, short mixing time, and a homogeneous end product - Dinnissen scored best.
Sam Dimassi- Owner - Nutri-Dynamics
High-quality vacuum coaters
We chose to work with Dinnissen because they supply high-quality vacuum coaters that fit exactly within our production lines.
Arnold Balledux- Global Technical Head Animal Feeds & Vice-president Animal Feed & Protein - Olam Agri
Filled three complete factories
Dinnissen has filled an entire factory for us with a complete production line, on three different occasions. They just get it right: from mixers and sifters to sampling and automation.
Erik Schut- Managing Director - Jonker & Schut
Six-fold increase of total production
Production has gone from 3-5 tons per day to 30 tons per day. That's a six-fold increase in total production.
Michiel de Boer- CEO - Nöll & Co.
Mixers have been running 30 years
Dinnissen machines may not be the cheapest in terms of purchase price, but in terms of value for money, there are none better. Our Dinnissen mixer has been running extremely reliably for 30 years.
Adwin van der Vorst- Directeur - VDV Group
Easily and safely changing sieve basket
The ease and safety with which the sieve basket can be changed were decisive factors in our choice for a Dinnissen sifting machine.
Mr. Kreuzer- Company Manager - Südstärke
World player in process technology
To realize production processes of the best quality, we work closely with Dinnissen: One of the strongest players in the world in process technology and hygienic design.
Gerben Koopmans- Project Engineering Manager - Nestlé
