When adding liquids to powders, grains, or granules, the dosing of these liquids is crucial. Dinnissen has both liquid dosing systems that weigh before adding liquids and systems that measure the amount of liquid through a flow measurement in the supply line. Our specialists will gladly help you make the best choice for your system.
Liquid Dosing cabinet (3D)
Liquid Dosing SKID (3D)
Spraying System for vacuum coater (3D)
Liquid Dosing SKID (3D)
Liquid Dosing SKID (3D)
Liquid Dosing SKID (3D)
Liquid Dosing SKID (3D)
Liquid Dosing SKID (3D)
Liquid Dosing SKID
Liquid Dosing SKID
Liquid Dosing SKID
Liquid Dosing SKID
Liquid Dosing cabinet
Liquid Dosing cabinet
Liquid Dosing cabinet
Liquid Dosing System
Liquid Dosing System
Spraying System for mixer
Spraying System for mixer
Markets:
Pet foodProcess:
Feeding & WeighingDinnissen has developed a liquid dosing system for extremely accurate dosing of a variety of liquids. During mixing or coating within a production process, a wide variety of raw materials and liquids are added. The required amount can vary from a few grams to hundreds of kilograms per batch. With a Dinnissen liquid dosing system, it is possible to achieve exactly the desired liquid dosage at the right speed.
A Dinnissen liquid dosing system can be supplied in both a casing and a SKID and can be integrated into existing and new settings. The liquid can be weighed before addition, but Dinnissen also has a version with flow measurement. This eliminates the need for a weighing tank and the system takes up less space. We have various nozzle sizes to achieve the desired dosage. In addition, a heating element can be added to increase the viscosity of the product to make it flow more easily.
Liquid dosing can be done in two ways. In the first option, the liquid to be added is accurately weighed using weighing cells before it is added. The second option uses a flow measurement in the supply line. This has the advantage of no longer requiring a weighing tank. Due to the increasing accuracy, the second option is being used more and more often. With both options, different nozzle sizes are possible to achieve the desired dosage. It is possible to equip the liquid dosing system with a heating element. With this, the viscosity of the product can be increased and more viscous products will start to flow better. The viscosity, solidification temperature and acidity of the liquids place high demands on the equipment. Dinnissen has the necessary knowledge to design systems that meet all the requirements of modern dosing systems.
A wide variety of raw materials and liquids can be added during the mixing or coating process. These include essential oils, fats, acids, aromas, enzymes, and vitamins. Dinnissen specializes in processing dry products (grains, powders, and granulates). For optimal results, however, the quality of the liquid dosing system is very important. That’s why Dinnissen is happy to take on the development of this component. This way we create full control over pressure, flow, fine particles and optimal integration.
The amount of liquid to be dosed can vary from a few grams to hundreds of kilograms per batch. A Dinnissen liquid dosing system ensures that exactly the right amount of liquid is added. This can be done by weighing the liquid beforehand, but also by measuring the flow in the supply pipe. Based on the application and the desired accuracy, Dinnissen will gladly advise you on the most suitable solution. A liquid dosing system can be used for both batch and continuous dosing. The frequency-controlled pumps ensure that the liquid is dosed at the right speed.
Download our brochure or the datasheet with all options, versions, and measurements or freely contact one of our experts.
When mixing (raw) materials to the desired result, the right amount of each substance is crucial. Dinnissen offers various solutions for accurately weighing and adding substances to the production process. In addition to liquid dosing systems, we also supply solutions for solids, Gain-in-Weight Systems, Loss-in-Weight Systems, a Feeder Valve, and a Feeding Hopper.
System integrator Dinnissen optimizes and innovates your production process with tailored solutions: developed, manufactured and tested in-house. From product intake, transport, dosing and weighing, mixing, grinding, sieving and packaging to full automation and control. We maximize the performance and efficiency of your entire process.
Choice based on trust, feeling, and price
We made a choice based on trust, feeling, and price. In this total package, Dinnissen came out best.
Marcel van den Oetelaar- Proces Technologist - Vobra
Tailor-made solution for every problem
What charmed us most about Dinnissen was that they responded perfectly to our questions each time: they jumped right in and quickly came up with a tailor-made solution to each problem.
Jos Falvay- Project manager - Perstorp
Process specialists unafraid to push boundaries
Dinnissen possesses expertise distinct from our in-house capabilities. They are process specialists unafraid to push boundaries and set limits.
Raymond Nolet- Founder - MiFood
Drastically improved feed-quality
90% of our customers with laying hens have already switched to the new feed produced using the Pegasus® mixer and the Thermidor® system.
Kurt Egli- Former manager - Egli Mühlen
Technicians, not salespeople
Dinnissen's representatives strive for the best solutions. They are engineers first and salespeople second.
Frans van Zutven- Founder and Director - Van Zutven
Flexibility, cleaning, short mixing time, and a homogeneous end product
We also considered other options but on the points we considered most important - flexibility, cleaning, short mixing time, and a homogeneous end product - Dinnissen scored best.
Sam Dimassi- Owner - Nutri-Dynamics
Mixers have been running 30 years
Dinnissen machines may not be the cheapest in terms of purchase price, but in terms of value for money, there are none better. Our Dinnissen mixer has been running extremely reliably for 30 years.
Adwin van der Vorst- Directeur - VDV Group
No challenge is too big
At Dinnissen, they think in terms of challenges, not problems. They don't give up and keep going until there is a solution that satisfies all parties.
Martin Sonneveld- Production Director - United Petfood Waalwijk
High-quality vacuum coaters
We chose to work with Dinnissen because they supply high-quality vacuum coaters that fit exactly within our production lines.
Arnold Balledux- Global Technical Head Animal Feeds & Vice-president Animal Feed & Protein - Olam Agri
Didn't consider any other option than Dinnissen
When the mixers needed replacement and Dinnissen could do a one-on-one replacement, we really didn't consider any other option than Dinnissen.
Elmar Flach- Technical Specialist - Voergroep Zuid
Supplied entire installation
Dinnissen is the first company we've worked with that delivers a total package. Because Dinnissen supplied the entire installation, including platforms and safety installations, the entire line is CE-certified.
Michel Kliphuis- Manager - Steinweg Amsterdam
Customized mixers
Dinnissen thought along with us from start to finish. For example, they used existing drawings for these new mixers to save us costs in the engineering phase.
Pieter Gorter- Project Manager - ForFarmers
Collaboration based on mutual respect
Our collaboration with Dinnissen is based on mutual respect and trust. We challenge each other to continuously innovate and improve
Stefan Kuijpers- Director - Vitelia
World player in process technology
To realize production processes of the best quality, we work closely with Dinnissen: One of the strongest players in the world in process technology and hygienic design.
Gerben Koopmans- Project Engineering Manager - Nestlé
Unique in preliminary work
What really makes Dinnissen unique, is the preliminary work. You can literally count every bolt and nut in the drawing.
Kenneth Gijzen- Maintenance & Engineering Manager - AAK Rotterdam
Increased capacity despite using 17 fewer mixers
The amazing part is that we managed to increase the capacity, despite using 17 fewer mixers.
Edward Depre- Project Manager - Group Depre
Mixing time of 60 seconds per batch
Previously, we had standard times in the mixing process of 14 - 15 minutes. With the Pegasus® mixer we achieve a mixing time of 60 seconds per batch.
Lothar Pixa- Director - Planta
Filled three complete factories
Dinnissen has filled an entire factory for us with a complete production line, on three different occasions. They just get it right: from mixers and sifters to sampling and automation.
Erik Schut- Managing Director - Jonker & Schut
Six-fold increase of total production
Production has gone from 3-5 tons per day to 30 tons per day. That's a six-fold increase in total production.
Michiel de Boer- CEO - Nöll & Co.
The importance of hygiene and safety requirements
Dinnissen fully understood the importance of hygiene and safety requirements in our industry. They went the extra mile by providing us with all the necessary documentation, all ATEX drawings, and full traceability.
Anton Vleeshouwers- Project Director - DSM
Quadrupled production capacity
In collaboration with Dinnissen, we have quadrupled our production capacity from 3 to 12 tons per hour.
Harald Schmalwieser- Managing Director - Solan
Fully automated sampling
We considered several machine developers, but the high quality of the Dinnissen machines and the competence and commitment of the employees were decisive for us.
Arjan van Dijk- Project Manager - Ausnutria
Service on weekends
One day there was an important issue and one of Dinnissen's engineers immediately took action during the weekend. I have never seen other foreign partners do this.
Mr. Kimio Aono- Founder - APTe Japan
Easily and safely changing sieve basket
The ease and safety with which the sieve basket can be changed were decisive factors in our choice for a Dinnissen sifting machine.
Mr. Kreuzer- Company Manager - Südstärke