One of the most common techniques used to transport bulk goods is pneumatics. Using air or gas, the product is transported with high precision and hygiene. Pneumatic conveying offers several options. Bulk goods can be transported with negative or positive pressure, you can transport the goods by dilute-phase transport or dense-phase transport, and you can choose gas or air.
Pneumatic Conveying (3D)
Pressure Vessel (3D)
Receiving Hopper (3D)
Dilute phase transport
Pneumatic Conveying
Pneumatic Conveying
Pneumatic Conveying
Pressure Vessel
Pressure Vessel
Pressure Vessel
Receiving Hopper
Receiving Hopper
Receiving Hopper
Process:
Conveying & HandlingWith pneumatic conveying, bulk goods can be transported quickly and hygienically. When working with negative pressure, we call this suction transport. Powders, grains and granulates are moved using sucked-in air or gas. These products can be transported from one or more entry points to a receiving unit. You can also transport using overpressure, where the powders, grains and granules are moved by a propelling air or gas flow.
Substances can be transported in different phases and densities. Depending on the product to be transported and the desired transport conditions, you can choose dilute-phase transport or dense-phase transport.
In dilute-phase transport, the material is pneumatically mixed with air or gas, causing the material to be transported ‘in suspension’. This is characterized by a relatively high transport speed and a low load factor. This minimizes product damage and enables both drying and cooling during transport. A high-pressure blower or vacuum pump is often used as a power source in dilute phase transport. The dilute phase transport system is reliable, robust, and suitable for situations with uneven supply.
In dense-phase transport, solids are propelled through the pipeline as a ‘wad’, using air or gas. This type of transport is characterized by relatively low transport speeds, with relatively low air/gas consumption. A medium pressure compressor is often used as a source. Two systems can be distinguished within this type of transport, namely a dense phase with high-pressure locks or vacuum and a dense phase with transmitting barrel transport.
Thanks to high-pressure locks, bulk goods can be supplied in a transport system even at high pressure differences. This involves low gas consumption and high loading. Transport via high-pressure locks is particularly suitable for a continuous production process in which minimum product damage is required. With negative pressure, a vacuum is created to suck the product to the right place.
Transmitting barrel transport involves low speed, high loading and low gas consumption. This mode of transport is especially suitable when minimal product damage is allowed and suits a discontinuous production system, within a dust-free environment. The system is free of rotating parts.
Dinnissen offers various solutions for pneumatic conveying. We have systems that work with air pressure, but also solutions with gas. The product can be temporarily diluted with air or gas, allowing high transport speeds to be achieved. In addition, you can move the product as a whole, using high-pressure locks or transmitting barrel transport.
In addition to the above solutions, Dinnissen has developed a special slow-flow transport system, suitable for continuous production processes with strict hygiene requirements. The focus here is on fast and thorough cleaning, including ultra-dustproof sealing of the transport system. As the ratio of loading to conveying air is optimal, relatively low transport speeds occur. This makes the system particularly suitable for breakage-sensitive, abrasive and greasy raw materials, such as milk powder, sugar, sand, chalk, milk, and cocoa.
Within the slow flow concept, an extremely compact receiver system is sufficient, which is quick and easy to clean and can be easily integrated into new and existing situations. Moreover, it has low gas and energy consumption, which makes a compact air handling system and a small air filter sufficient.
Depending on your preferences, the slow-flow transport system can be automatically cleaned and made ultra-dustproof. It is also possible to increase capacity. In addition, high-precision measuring and weighing equipment can be integrated, you can create under- or overpressure, choose inflatable seals or automatic cleaning by air. As a source for generating the transport medium, a medium pressure blower or compressor is often used, with an overpressure of 0.2 to 0.5 bar.
In addition to the above options, we also have closed-loop transport systems. As the name suggests, it’s a closed-loop system, in which the transport medium air is replaced by an inert gas such as nitrogen. This creates an explosion- and oxidation-free transport solution. To keep gas costs at a minimum, the system is equipped with an innovative gas recovery system.
With pneumatic suction transport, the pump is placed behind the receiving unit. Thanks to the negative pressure, there is hardly any dust emission even when the hatches or coupling points are opened. It’s therefore ideal for situations with high demands on hygiene and a dust-free environment. An additional advantage is that suction transport often does not require additional transport air cooling. A precondition, however, is that the raw materials are dosed somewhat regularly.
In pneumatic blow transport, the pump is placed at the beginning of the system. Blown air makes it possible to transport raw materials from one entry point to one or more receiving units. It’s also possible to indicate where the product should go, through a changeover system. An additional advantage of pneumatic blow transport is that dirt and dust cannot enter the production process.
Download our brochure or the datasheet with all options, models, and measurements, or freely contact one of our experts.
Dinnissen offers a wide variety of pneumatic and mechanical systems for conveying powders, grains and granulates. Besides pneumatic conveying, Dinnissen has a wide range of techniques for handling drums, bags, Big Bags, bag-in-boxes, and various other forms of packaging. With high-quality process knowledge, Dinnissen provides efficient systems that meet all applicable international guidelines.
System integrator Dinnissen optimizes and innovates your production process with tailored solutions: developed, manufactured and tested in-house. From product intake, transport, dosing and weighing, mixing, grinding, sieving and packaging to full automation and control. We maximize the performance and efficiency of your entire process.
The importance of hygiene and safety requirements
Dinnissen fully understood the importance of hygiene and safety requirements in our industry. They went the extra mile by providing us with all the necessary documentation, all ATEX drawings, and full traceability.
Anton Vleeshouwers- Project Director - DSM
No challenge is too big
At Dinnissen, they think in terms of challenges, not problems. They don't give up and keep going until there is a solution that satisfies all parties.
Martin Sonneveld- Production Director - United Petfood Waalwijk
Customized mixers
Dinnissen thought along with us from start to finish. For example, they used existing drawings for these new mixers to save us costs in the engineering phase.
Pieter Gorter- Project Manager - ForFarmers
Collaboration based on mutual respect
Our collaboration with Dinnissen is based on mutual respect and trust. We challenge each other to continuously innovate and improve
Stefan Kuijpers- Director - Vitelia
Didn't consider any other option than Dinnissen
When the mixers needed replacement and Dinnissen could do a one-on-one replacement, we really didn't consider any other option than Dinnissen.
Elmar Flach- Technical Specialist - Voergroep Zuid
Easily and safely changing sieve basket
The ease and safety with which the sieve basket can be changed were decisive factors in our choice for a Dinnissen sifting machine.
Mr. Kreuzer- Company Manager - Südstärke
World player in process technology
To realize production processes of the best quality, we work closely with Dinnissen: One of the strongest players in the world in process technology and hygienic design.
Gerben Koopmans- Project Engineering Manager - Nestlé
Mixing time of 60 seconds per batch
Previously, we had standard times in the mixing process of 14 - 15 minutes. With the Pegasus® mixer we achieve a mixing time of 60 seconds per batch.
Lothar Pixa- Director - Planta
Filled three complete factories
Dinnissen has filled an entire factory for us with a complete production line, on three different occasions. They just get it right: from mixers and sifters to sampling and automation.
Erik Schut- Managing Director - Jonker & Schut
Quadrupled production capacity
In collaboration with Dinnissen, we have quadrupled our production capacity from 3 to 12 tons per hour.
Harald Schmalwieser- Managing Director - Solan
Tailor-made solution for every problem
What charmed us most about Dinnissen was that they responded perfectly to our questions each time: they jumped right in and quickly came up with a tailor-made solution to each problem.
Jos Falvay- Project manager - Perstorp
Unique in preliminary work
What really makes Dinnissen unique, is the preliminary work. You can literally count every bolt and nut in the drawing.
Kenneth Gijzen- Maintenance & Engineering Manager - AAK Rotterdam
Choice based on trust, feeling, and price
We made a choice based on trust, feeling, and price. In this total package, Dinnissen came out best.
Marcel van den Oetelaar- Proces Technologist - Vobra
Process specialists unafraid to push boundaries
Dinnissen possesses expertise distinct from our in-house capabilities. They are process specialists unafraid to push boundaries and set limits.
Raymond Nolet- Founder - MiFood
Flexibility, cleaning, short mixing time, and a homogeneous end product
We also considered other options but on the points we considered most important - flexibility, cleaning, short mixing time, and a homogeneous end product - Dinnissen scored best.
Sam Dimassi- Owner - Nutri-Dynamics
Increased capacity despite using 17 fewer mixers
The amazing part is that we managed to increase the capacity, despite using 17 fewer mixers.
Edward Depre- Project Manager - Group Depre
Service on weekends
One day there was an important issue and one of Dinnissen's engineers immediately took action during the weekend. I have never seen other foreign partners do this.
Mr. Kimio Aono- Founder - APTe Japan
Mixers have been running 30 years
Dinnissen machines may not be the cheapest in terms of purchase price, but in terms of value for money, there are none better. Our Dinnissen mixer has been running extremely reliably for 30 years.
Adwin van der Vorst- Directeur - VDV Group
Drastically improved feed-quality
90% of our customers with laying hens have already switched to the new feed produced using the Pegasus® mixer and the Thermidor® system.
Kurt Egli- Former manager - Egli Mühlen
Supplied entire installation
Dinnissen is the first company we've worked with that delivers a total package. Because Dinnissen supplied the entire installation, including platforms and safety installations, the entire line is CE-certified.
Michel Kliphuis- Manager - Steinweg Amsterdam
High-quality vacuum coaters
We chose to work with Dinnissen because they supply high-quality vacuum coaters that fit exactly within our production lines.
Arnold Balledux- Global Technical Head Animal Feeds & Vice-president Animal Feed & Protein - Olam Agri
Fully automated sampling
We considered several machine developers, but the high quality of the Dinnissen machines and the competence and commitment of the employees were decisive for us.
Arjan van Dijk- Project Manager - Ausnutria
Six-fold increase of total production
Production has gone from 3-5 tons per day to 30 tons per day. That's a six-fold increase in total production.
Michiel de Boer- CEO - Nöll & Co.
Technicians, not salespeople
Dinnissen's representatives strive for the best solutions. They are engineers first and salespeople second.
Frans van Zutven- Founder and Director - Van Zutven
